Connecting your Camera to a TV or Monitor

1. Identify the video input ports available on your display and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. Please note that the ports available will vary depending on the model of your display and ELMO. 

 

                                                                                                    [Display]                                       

  

                                                                       [EXAMPLE PRODUCTS; PORTS MAY VARY]   
                                     

USB is not compatible with TVs and Monitors.

2. After determining the ports available, locate compatible cable. 

                        VGA CABLE                                                     HDMI CABLE                 

          

                 

3. Make the connection. 

ONLY ONE CONNECTION BETWEEN DEVICES IS REQUIRED (VGA OR HDMI)

4. Power on both devices and enjoy! 

• Related Articles

• Connecting your Camera to a Projector

  1. Identify the video input ports available on your projector and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. Please note that the ports available will vary depending on the model of ...

• Setting up HDMI or VGA Passthrough

  1. Identify the video input ports available on your display device (Projector, Monitor, IFP) and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. Please note that the ports available will ...

• TT-12G HDMI over USB feature

  Please note that the settings menus can only be accessed when your camera is connected to a display (TV, Projector, or Monitor) and not a computer until the HDMI over USB feature is enabled. Please see Connecting your Camera to a TV or Monitor or ...

• Using an ELMO Document Camera with a Third-Party Interactive Display

  Connecting via USB - Direct Connect your document camera to your display using the proper USB cable. If your interactive display has a preinstalled camera application, you may be able to use this application to view your document camera. With a ...

• Connecting your TT-12G Camera to an ELMO Cast

  1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...