PX Series Serial RS232 Commands

PX Series Serial RS232 Commands

    • Related Articles

    • PX-10E and PX-30E Product Support

      Having trouble setting up your PX series document camera? Use this article to troubleshoot common issues and get answers to your questions!  Troubleshooting Problem: Camera not recognized / No image from camera Solution: Change cable and/or input ...
    • PX Series TCP/IP commands

      PDF Download link at bottom 
    • PX-10E/30E RS232 port changes

      Newer PX units will now use the Euro terminal block for RS-232C. The updated pinout can be found below - A full list of commands and specifications can be found here.
    • How to playback non-ELMO images on PX series camera

      The PX series of cameras can be used to playback images that do not originate from the ELMO. However, the storage device must be setup in a specific way before the ELMO will read it. Below is a quick setup guide that can be used on either a SD card ...
    • PX Series Startup Failure / Splash Screen Bug

      It has come to our attention that PX series cameras running older firmware are experiencing a 'Splash Screen Bug' that prevents the cameras from properly starting. If your camera is affected, please try a firmware update. Firmware downloads and ...