PX Series TCP/IP commands
PDF Download link at bottom
Related Articles
PX-10E and PX-30E Product Support
Having trouble setting up your PX series document camera? Use this article to troubleshoot common issues and get answers to your questions! Troubleshooting Problem: Camera not recognized / No image from camera Solution: Change cable and/or input ...
PX Series Serial RS232 Commands
How to playback non-ELMO images on PX series camera
The PX series of cameras can be used to playback images that do not originate from the ELMO. However, the storage device must be setup in a specific way before the ELMO will read it. Below is a quick setup guide that can be used on either a SD card ...
PX Series Startup Failure / Splash Screen Bug
It has come to our attention that PX series cameras running older firmware are experiencing a 'Splash Screen Bug' that prevents the cameras from properly starting. If your camera is affected, please submit an online request for a firmware update. ...
PX-10E/30E RS232 port changes
Newer PX units will now use the Euro terminal block for RS-232C. The updated pinout can be found below - A full list of commands and specifications can be found here.