TT-12G Automatic Miracast Connection

TT-12G Automatic Miracast Connection






    • Related Articles

    • Miracast issues between STEM Cams (TT-12W, MO-2, MA-1) and third-party receivers

      We cannot guarantee compatibility for Miracast connections between ELMO STEM cams and non-ELMO receivers. Please contact the manufacturer of your Miracast device or smart display and verify: 1. The type of connection; peer-to-peer or network. This ...

    • Connecting your TT-12G Camera to an ELMO Cast

      1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...

    • Connecting your Wireless STEM Camera (MA-1, MO-2, and TT-12W) to an ELMO Cast

      1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...

    • TT-12G Overview

    • TT-12i and TT-12iD USB Mode

      The TT-12i and TT-12iD must have the USB Mode Setting set to “UVC” to be recognized natively by a computer Operating System. During this process ensure the USB cable is NOT connected to the camera as it may cause the setting change to fail. 1. ...