ELMO Board update from external drive - FAT32

ELMO Board update from external drive - FAT32

When updating your ELMO Board from an external storage device, please make sure the storage device is formatted in FAT32. 
    • Related Articles

    • How to add and change the wallpaper on your ELMO Board R2

      1. Open the Settings menu on your ELMO Board. 2. Select the Wallpaper Tab, and then press Add Wallpaper. 3. Navigate your files to find the desired wallpaper image to add to the collection. You can use images saved on your ELMO Board, a USB Drive, or ...
    • ELMO Board R2 QuickStart

      PDF Download available at bottom of article.
    • How to update your ELMO Board R2

      You can update your ELMO Board firmware using one of the following methods. Please review both and decide which is best for your setup. Method 1: Online OTA update If you ELMO board has internet connection, you can download the firmware from the ...
    • ELXXR2 Power On Serial Command not Working

      In order to use the Power On serial command please make sure your ELMO Board is updated past version 1.1.8 System Settings > About > Update > System Network Upgrade If the panel is locked you may need to first unlock it. System Settings > Admin ...
    • ELMO Board R1 Quickstart

      PDF Download available at bottom of article.