TT-12G enable full settings menu
For help connecting to a display please see our guides; Connecting your Camera to a TV or Monitor and Connecting your Camera to a Projector
If you have HDMI over USB enabled, you can connect your ELMO to a PC instead. This setting is NOT enabled by default. To enable it, please see
below.
Related Articles
TT-12G and CRA-2 usage instructions
To use the CRA-2 with your TT-12G, you will first need to enable the 'Full Menu' setting on your device. Then to bring up the CRA-2 tools, you will need to press the Menu button on your unit.TT-12i and TT-12iD USB Mode
The TT-12i and TT-12iD must have the USB Mode Setting set to “UVC” to be recognized natively by a computer Operating System. During this process ensure the USB cable is NOT connected to the camera as it may cause the setting change to fail. 1. ...TT-12G Overview
TT-12W Product Support
Having trouble setting up your TT-12W document camera? Use this article to troubleshoot common issues and get answers to your questions! Troubleshooting Problem: Camera not recognized / No image from camera Solution: Change cable and/or input port. ...TT-12W Blinking red light firmware update
This guide if for cameras with a serial number of 4800000 or higher. If you have a lower serial number, please submit a support ticket. This guide is intended for advanced users only. Please review troubleshooting tips before trying. If your TT-12W ...