TT-12G HDMI over USB feature

TT-12G HDMI over USB feature



Please note that the settings menus can only be accessed when your camera is connected to a display (TV, Projector, or Monitor) and not a computer until the HDMI over USB feature is enabled. Please see Connecting your Camera to a TV or Monitor or Connecting your Camera to a Projector for details. 




    • Related Articles

    • TT-12G HDMI Input to USB passthrough

      A guide to setting up passthrough can be found here - TT-12G HDMI over USB feature

    • TT-12G HDMI Input to USB passthrough troubleshooting

      If you are having trouble using the HDMI Input over USB feature, please see below for troubleshooting tips. Before starting, please make sure HDMI passthrough is enabled on your TT-12G to use this feature. A guide to setting up passthrough can be ...

    • TT-12i and TT-12iD USB Mode

      The TT-12i and TT-12iD must have the USB Mode Setting set to “UVC” to be recognized natively by a computer Operating System. During this process ensure the USB cable is NOT connected to the camera as it may cause the setting change to fail. 1. ...

    • Setting up your ELMO STEM Cam (TT-12W, MA-1, MO-2) for USB Connection

      This article will explain how to setup your new ELMO STEM Cam for USB connection. Most TT-12W, MA-1, and MO-2 cameras will require this guide, but not all steps may be necessary. After following this guide, please see our guide for Connecting your ...

    • TT-12G enable full settings menu

      For help connecting to a display please see our guides; Connecting your Camera to a TV or Monitor and Connecting your Camera to a Projector If you have HDMI over USB enabled, you can connect your ELMO to a PC instead. This setting is NOT enabled by ...