Hidden WiFi on ELMO Board R2

Hidden WiFi on ELMO Board R2

Please follow this guide to connect your ELMO Board to a hidden network. 


1. Open App list and locate advanced settings.



2. Type in ' wifi_settings ' and press Run.



If WiFi is not already enabled, you can enable it now. 
















3. Scroll down to Add a network.



4. Enter the network's SSID and select Advanced options.

 

5. Scroll down and set Hidden network to Yes.



You can continue to configure the network settings as needed from this point. When you are finished, press SAVE and you will be connected to your network. 
    • Related Articles

    • ELMO Board R1 Quickstart

      PDF Download available at bottom of article.
    • ELMO Board R2 QuickStart

      PDF Download available at bottom of article.
    • Connecting your ELMO Camera to an ELMO Board - USB Direct

      1. Locate the USB ports available on your ELMO Board and on your ELMO camera. For exact port locations, please refer to your product manual.                                                               [EXAMPLE ELMO PRODUCTS; PORTS MAY VARY]   2. ...
    • ELMO Board update from external drive - FAT32

      When updating your ELMO Board from an external storage device, please make sure the storage device is formatted in FAT32. 
    • Connecting your Computer to an ELMO Board

      1. Identify the video output ports available on your computer and find the matching input on your ELMO Board.                                                                                                               [EXAMPLE PRODUCTS; PORTS MAY ...