Removal of HDMI Output on ELMO Boards

Unfortunately, due to chip shortages some new ELMO Boards will have the HDMI Output removed. Affected devices will have HOL on their label.  



We appreciate your understanding in this matter. If you have any questions please contact our support team. 

• Related Articles

• Connecting your Computer to an ELMO Board

  1. Identify the video output ports available on your computer and find the matching input on your ELMO Board.                                                                                                               [EXAMPLE PRODUCTS; PORTS MAY ...

• Connecting your ELMO Camera to an ELMO Board - HDMI and VGA

  1. Locate the video input ports available on your ELMO Board and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. For exact port locations, please refer to your product manual.                ...

• ELMO Board R1 Quickstart

  PDF Download available at bottom of article.

• Connecting your ELMO Camera to an ELMO Board - USB to OPS

  1. Locate the USB ports available on your OPS and on your ELMO camera. The OPS should be installed on the side of your ELMO Board. For exact port locations, please refer to your product manual.  You can also connect the ELMO Camera to a free USB port ...

• How to use your ELMO Camera and Computer with your ELMO Board

  1. Locate the USB ports available on your Computer and on your ELMO camera. For exact port locations, please refer to your product manual.                                                             ...