TT-12G and CRA-2 usage instructions
To use the CRA-2 with your TT-12G, you will first need to enable the 'Full Menu' setting on your device.
Then to bring up the CRA-2 tools, you will need to press the Menu
button on your unit.
Then to bring up the CRA-2 tools, you will need to press the Menu
Related Articles
TT-12G and CRA-2 compatibility
Some early production TT-12G units shipped with a firmware that is incompatible with the CRA-2. Please email support for updated firmware. https://support.elmousa.com/portal/en/newticketCRA-2 Overview
Use this article to learn more about your new ELMO device. For troubleshooting, please see our device help page. Package Contents Supported Software Windows 7 / 8 / 8.1 / 10 /11 - ELMO Interactive Toolbox for Windows MacOS 10.14 + - ELMO Interactive ...TT-12i and TT-12iD USB Mode
The TT-12i and TT-12iD must have the USB Mode Setting set to “UVC” to be recognized natively by a computer Operating System. During this process ensure the USB cable is NOT connected to the camera as it may cause the setting change to fail. 1. ...TT-02RX Troubleshooting
Having trouble setting up your TT-02RX document camera? Use this article to troubleshoot common issues! Issue: Document camera not recognized (Mac) Most Common Cause: Using a Multiport / hub USB-C Adapter Solution: Only use a 1-to-1 USB-C adapter ...TT-02s Troubleshooting
Having trouble setting up your TT-02s document camera? Use this article to troubleshoot common issues! Issue: Document Camera not recognized error Image Mate (Windows) Most Common Cause: Additional driver pack is not installed Solution: Run ...