How to rename inputs on the ELMO Board input menu

1. Open the Source Settings / Input Selection menu. Choose Rename Source. 

2. Select the Source you want to name. 

3. Give it a name and press CONFIRM. 

• Related Articles

• Connecting your ELMO Camera to an ELMO Board - USB Direct

  1. Locate the USB ports available on your ELMO Board and on your ELMO camera. For exact port locations, please refer to your product manual.                                                               [EXAMPLE ELMO PRODUCTS; PORTS MAY VARY]   2. ...

• Connecting your ELMO Camera to an ELMO Board - USB to OPS

  1. Locate the USB ports available on your OPS and on your ELMO camera. The OPS should be installed on the side of your ELMO Board. For exact port locations, please refer to your product manual.  You can also connect the ELMO Camera to a free USB port ...

• Connecting your Computer to an ELMO Board

  1. Identify the video output ports available on your computer and find the matching input on your ELMO Board.                                                                                                               [EXAMPLE PRODUCTS; PORTS MAY ...

• How to find your ELMO Board R2's serial number

  1. Open your Apps menu. 2. Open the Settings app. 3. If needed, open Admin settings and input your administrator pin. By default the pin is "0000000" . 4. Under the About section, locate the serial number. The first two digits of your serial number ...

• Connecting your ELMO Camera to an ELMO Board - HDMI and VGA

  1. Locate the video input ports available on your ELMO Board and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. For exact port locations, please refer to your product manual.                ...