TT-12iD / TT-12i powering off after short usage time
Related Articles
OX-1 not powering on
If your OX-1 is not turning on please review this article for suggestions. 1 - If you just plugged in your OX-1 camera to your computer and nothing is happening, it is because you are not running software. The OX-1 requires software to use and will ...
TT-12W Camera will not turn on and the power LED is flashing red
Please try the following troubleshooting steps. 1. Change the power adapter with a known working one. 2. Unplug the unit, hold the power button for 10 seconds to drain residual power, and then plug it back in + wait 1 hour. 3. For cameras with a ...
OX-1 No Power when Connected to Computer
The OX-1 will not power on by itself when connected to a computer. You must have software open to turn on the OX-1 and to use it's LED light. The OX-1 automatically turns itself off when there is no software open to save power on your computer. For ...
Solid red power light and not powering on
To submit an online ticket: https://support.elmousa.com/portal/en/newticket
TT-12G Overview