ELMO Camera LED light issues

If the LED light on your ELMO is no longer functioning properly, please contact our support team for repair service. To prevent damaging the unit, please do not try to repair the LED yourself.

Click here to contact us

• Related Articles

• TT-12W LED Light not working

  Sometimes a disruption of power to the TT-12W can cause the LED Light to stop functioning. To potentially correct the issue please try the following: 1. Unplug the camera's power adapter from the wall/power socket, then unplug the other end from the ...

• TT-12W Blinking red light firmware update

  This guide if for cameras with a serial number of 4800000 or higher. If you have a lower serial number, please submit a support ticket. This guide is intended for advanced users only. Please review troubleshooting tips before trying. If your TT-12W ...

• OX-1 not powering on

  If your OX-1 is not turning on please review this article for suggestions. 1 - If you just plugged in your OX-1 camera to your computer and nothing is happening, it is because you are not running software. The OX-1 requires software to use and will ...

• TT-12W Camera will not turn on and the power LED is flashing red

  Please try the following troubleshooting steps. 1. Change the power adapter with a known working one. 2. Unplug the unit, hold the power button for 10 seconds to drain residual power, and then plug it back in + wait 1 hour. 3. For cameras with a ...

• Connecting your TT-12G Camera to an ELMO Cast

  1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...