Setup and New Users
Using a CRA-2 with your ELMO Camera
There are a couple of ways to use your CRA-2 with your ELMO Camera. Below are example setups you can use to pair your devices together. For a more complete overview of the CRA-2, please see our CRA-2 Overview page. With a computer and ELMO Software ...
Example setups for using your Document Camera
There are a number of ways you can use your camera. Below are just a few common setups you can use with your devices. Not all setups can be used with all ELMO devices. Please refer to the device specifications for detailed port availability on your ...
Request a Product Demo
Interested in ELMO products? Click the link below to request a demo! https://www.elmousa.com/contact
SD Card identification guide
Cable Identification Guide
Using an ELMO Document Camera with a Third-Party Interactive Display
Connecting via USB - Direct Connect your document camera to your display using the proper USB cable. If your interactive display has a preinstalled camera application, you may be able to use this application to view your document camera. With a ...
Connecting your Camera to a TV or Monitor
1. Identify the video input ports available on your display and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. Please note that the ports available will vary depending on the model of your ...
Connecting your Camera to a Computer
1. Identify the USB Ports on your computer and ELMO. If your ELMO came with a USB cable, please use that cable only as not all cables are compatible with our cameras. [EXAMPLE ELMO PRODUCTS; PORTS MAY VARY] [Computers] 2. Find the right software for ...
Setting up a Hybrid viewing experience (simultaneous in person and virtual audiences)
1. Identify the video input ports available on your display device (Projector, Monitor, IFP) and compare them to the video out ports on your computer. [Projector] [Display] [Computers] 2. Connect your computer to the display. Then, connect your ELMO ...
Setting up HDMI or VGA Passthrough
1. Identify the video input ports available on your display device (Projector, Monitor, IFP) and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. Please note that the ports available will ...
Connecting your Camera to a Projector
1. Identify the video input ports available on your projector and compare them to the video out ports on your ELMO camera. The ports will be labeled as 'OUT' on your camera. Please note that the ports available will vary depending on the model of ...
Software and Drivers Downloads
Looking for software or drivers? Please visit our software page. All software requires a USB connection from your ELMO to your computer. You can also read our computer connection guide by clicking here. If you're having trouble picking out the right ...