Document Cameras | OX Cameras

OX Cameras
Installing the OX-1 desk clamp
1. Loosen the desk grip 2. Locate the clamp insert on your OX-1 3. Slide the clamp into the OX-1 4. Place the clamp onto the side of your desk and tighten the grip Do not over tighten the clamp or you may damage the clamp, camera, and desk
OX-1 Not Connecting
If your OX-1 is not turning on please review this article for suggestions. 1 - If you just plugged in your OX-1 camera to your computer and nothing is happening, it is because you are not running software. The OX-1 requires software to use and will ...
OX-1 No Power when Connected to Computer
The OX-1 will not power on by itself when connected to a computer. You must have software open to turn on the OX-1 and to use it's LED light. The OX-1 automatically turns itself off when there is no software open to save power on your computer. For ...

Popular Articles
MX-1 and MX-P camera not connecting to Windows computers
We have recently been made aware that an update pushed by Microsoft to some Windows computers may be causing connection and driver problems with MX-1 and MX-P cameras. Affected Windows builds include those released in late December 2024 and January ...
Connecting your Camera to a Computer
1. Identify the USB Ports on your computer and ELMO. If your ELMO came with a USB cable, please use that cable only as not all cables are compatible with our cameras. [EXAMPLE ELMO PRODUCTS; PORTS MAY VARY] [Computers] 2. Find the right software for ...
FP-A Manual
Download the Manual using the link below.
Image Mate + Cloud Black / White Screen with no camera output
Please make sure all of the following are true: - Make sure your ELMO camera is plugged in before going to the website. For help, please click here to learn how to connect a camera to a computer. - Please use a supported web browser such as Google ...
ST-600 Manual
Download the Manual using the link below.

Document Cameras | OX Cameras | Knowledge Base