MA / MO Cameras
MO-2 and MA-1 Black bars on side of screen when connected to Image Mate computer app
If your Image Mate computer app is connected to a MA-1 or MO-2, and there are black bars on the side of the screen, it is likely that your camera's internal rotation feature was engaged. When the camera rotates the picture 90° , black bars are added ...
TT-12W, MA-1, MO-2 performance issues
Miracast issues between STEM Cams (TT-12W, MO-2, MA-1) and third-party receivers
We cannot guarantee compatibility for Miracast connections between ELMO STEM cams and non-ELMO receivers. Please contact the manufacturer of your Miracast device or smart display and verify: 1. The type of connection; peer-to-peer or network. This ...
How to factory reset a STEM camera (TT-12W, MA-1, MO-2)
If your camera is crashing, freezing, or having other issues, a factory reset is recommended. TT-12W and MO-2 models must be connected to a external display (TV, Monitor, Projector ; not a Computer) to enter the settings menus. Instructions can be ...
MA-1 Screen Issues
Connecting your Wireless STEM Camera (MA-1, MO-2, and TT-12W) to an ELMO Cast
1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...
MA-1 / MO-2 Frozen Fix
If your MA-1 / MO-2 camera is unresponsive, please locate the reset button on the underside of the device. Using a paperclip (or similarly sized tool), press the reset button for 3 seconds while the camera is turned on. The ELMO will power off, and ...
Setting up your ELMO STEM Cam for USB Connection (TT-12W, MA-1, MO-2)
This article will explain how to setup your new ELMO STEM Cam for USB connection. Most TT-12W, MA-1, and MO-2 cameras will require this guide, but not all steps may be necessary. After following this guide, please see our guide for Connecting your ...