TT-12W
TT-12W Black bars on side of screen when connected to Image Mate computer app
If your Image Mate computer app is connected to a TT-12W and there are black bars on the side of the screen, it is likely that your camera's internal rotation feature was engaged. When the camera rotates the picture 90° , black bars are added to the ...
Setting up your ELMO STEM Cam for USB Connection (TT-12W, MA-1, MO-2)
This article will explain how to setup your new ELMO STEM Cam for USB connection. Most TT-12W, MA-1, and MO-2 cameras will require this guide, but not all steps may be necessary. After following this guide, please see our guide for Connecting your ...
Connecting your Wireless STEM Camera (TT-12W, MA-1, and MO-2) to an ELMO Cast
1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...
How to factory reset a STEM camera (TT-12W, MA-1, MO-2)
If your camera is crashing, freezing, or having other issues, a factory reset is recommended. TT-12W and MO-2 models must be connected to a external display (TV, Monitor, Projector ; not a Computer) to enter the settings menus. Instructions can be ...
TT-12W LED Light not working
Sometimes a disruption of power to the TT-12W can cause the LED Light to stop functioning. To potentially correct the issue please try the following: 1. Unplug the camera's power adapter from the wall/power socket, then unplug the other end from the ...
TT-12W Camera will not turn on and the power LED is flashing red
Please try the following troubleshooting steps. 1. Change the power adapter with a known working one. 2. Unplug the unit, hold the power button for 10 seconds to drain residual power, and then plug it back in + wait 1 hour. 3. For cameras with a ...
Miracast issues between STEM Cams (TT-12W, MO-2, MA-1) and third-party receivers
We cannot guarantee compatibility for Miracast connections between ELMO STEM cams and non-ELMO receivers. Please contact the manufacturer of your Miracast device or smart display and verify: 1. The type of connection; peer-to-peer or network. This ...
TT-12W, MA-1, MO-2 performance issues