TT-12G
USB-C cable compatibility for TT-12G and MX-P3
The TT-12G and MX-P3 are supplied with a USB-C to USB-A connection cable. The camera's have a USB-C port for making connections between the ELMO and a computer. These ports will not work with a double-sided USB-C cable; only a USB-C to USB-A cable ...
TT-12G double press AutoFocus to freeze image
TT-12G Split screen mode
Connecting your TT-12G Camera to an ELMO Cast
1. Identify the HDMI input ports available on your display. Connect the ELMO Cast to the HDMI input, and then connect the ELMO Cast to power over USB. 2. Switch the display input to the ELMO Cast. Take note of the device name. More info about the ...
TT-12G HDMI Input to USB passthrough troubleshooting
If you are having trouble using the HDMI Input over USB feature, please see below for troubleshooting tips. Before starting, please make sure HDMI passthrough is enabled on your TT-12G to use this feature. A guide to setting up passthrough can be ...
TT-12G HDMI Input to USB passthrough
A guide to setting up passthrough can be found here - TT-12G HDMI over USB feature
TT-12G enable full settings menu
For help connecting to a display please see our guides; Connecting your Camera to a TV or Monitor and Connecting your Camera to a Projector If you have HDMI over USB enabled, you can connect your ELMO to a PC instead. This setting is NOT enabled by ...
TT-12G HDMI over USB feature
Please note that the settings menus can only be accessed when your camera is connected to a display (TV, Projector, or Monitor) and not a computer until the HDMI over USB feature is enabled. Please see Connecting your Camera to a TV or Monitor or ...
TT-12G Automatic Miracast Connection
TT-12G and CRA-2 usage instructions
To use the CRA-2 with your TT-12G, you will first need to enable the 'Full Menu' setting on your device. Then to bring up the CRA-2 tools, you will need to press the Menu button on your unit. Click the link below for additional instructions. TT-12G ...
TT-12G and CRA-2 compatibility
Some early production TT-12G units shipped with a firmware that is incompatible with the CRA-2. Please email support for updated firmware. https://support.elmousa.com/portal/en/newticket